Please send damaged CmDongles to the address stated below. Please also enclose a note, if a special defect exists, e.g. information on related Ticket ID: WIBU-SYSTEMS AG - COMPLAINT - Zimmerstraße 5 D more
Causes: The fact that the Firm Access Counter (FAC) has a value of 0 can have various causes: 1. First, the FAC may have been set to a value of 0 by a protected application. This reduction is a securi more
If a CmDongle is connected and can be displayed and read in CodeMeter Control Center, it can usually be assumed that it is working. A defect of a CmDongle is already apparent when connecting. In CodeM more
Which mode is to be used can be set via the Windows registry and the UseUmsDA key. Proceed as follows to open the registry: - Press the key combination [Windows] + [R] to open the dialog "Execute". - more
This is only useful for CmDongles with flash memory. To assign a permanent drive letter, please proceed as follows: 1. Open CodeMeter Control Center. 2. Click the "Process Stop CodeMeter Service" menu more
The VendorID (VID) is an identifier assigned by the USB Implementers Forum for companies that manufacture USB devices. The assigned VID is only assigned once and cannot be changed. All CmDongle produc more
When a Smart Bind CmActLicense has been applied with CodeMeter version 6.90 or later, a new mechanism is used to detect significant changes on virtual machines (restoring a snapshot or cloning the VM) more
To activate the license, please proceed as follows: 1. Import *.WibuCmLif file. cmu -i -f cmu -i -f Universal_Firm_Code_CmActLicense_6000010.WibuCmLif 2. Note the serial number of the new container (c more
Connecting removable devices on Linux requires device mounting into the local file structure to enable device access. While this happens by default for some desktop environments, this is not the defau more
In general, a CmDongle with at least firmware version 3.0 is required for Universal Firm Codes (Firm Codes greater than 6.xxx.xxx). If the licenses should also have license transfer options, at least more
The flashing represents mainly an information for our hardware department to gain further information in special cases. As a rule, the LED of the CmDongle flashes during read or write accesses and can more
In earlier firmware versions it could happen that the certificates within a Firm Item were no longer correctly available due to a very rare error. In this case, no Context File of this Firm Item could more
In such a case, it may help to give CodeMeter full disk access. To do this, please proceed as follows: 1. Open System Preferences. 2. Navigate to System Preferences Security & Privacy more
EBL stands for "ExecuteBciLow". And Bci for "Basic Command Interface". Here corresponding commands are sent to the CmDongle and then evaluated or processed there. Accordingly, errors can also occur, w more
If the CmDongle is not recognized as a device by Linux-Embedded, the CmDongle must be mounted with increased rights. For HID-Dongles (Human Interface Device) enter the command: sudo chmod o+rw /dev/hi more
If those errors display, errors in the USB communication with the CmDongle have been occurred. If the communication after several attempts still fails, finally Error 70 displays and no further communi more
Depending on the type, CmDongles support different communication types (USB device classes): Human Interface Device (HID) and Mass Storage Device (MSD). In the case of HID, a connected CmDongle behave more
To run the CmStick BMC under current Debian-based / Red Hat Enterprise Linux distributions, the CodeMeterLin Deamon must be started as 'root'. Proceed as follows: 1. Execute the following command in t more
Starting with Version 5.0, CodeMeter supports devices that conform to the USB Human Interface Device (HID) class specification. As an alternative option to the Mass Storage Device status, CmDongles ca more
You can reset the CodeMeter password for your CmDongle using the CodeMeter Master Password of this CmDongle. Please proceed as follows: - Open CodeMeter Control Center. - Select the desired CmDongle o more
Questa schermata riduce il consumo di energia del monitor quando non sei attivo sul nostro sito. Per riprendere la navigazione è sufficiente muovere il mouse.