Unfortunately, Wibu-Systems cannot guarantee a pass-through of the client to the host on virtual machines (VM). This due to the use of VM software-specific structures and systems not provided by Wibu- more
For systems where there are problems with the reverse DNS lookup, the reverse DNS lookup cache was introduced in CodeMeter starting with version 7.10. If the resolution of an IP to the corresponding D more
Since CodeMeter version 5.10, license access during a remote session to server operating systems (e.g. Windows Server 2012, Windows Server 2016, or Windows Server 2019) is only possible, if the number more
You can use CodeMeter WebAdmin on the client to check whether the CodeMeter network server is reachable. Please proceed as follows: 1. Open CodeMeter WebAdmin on the client, e.g. via CodeMeter Control more
Communication between protected applications and CodeMeter License Server (runtime) is based on the TCP/IP protocol. The communication default port is 22350 unless the port has been configured differe more
The package can only be verified with the debsig tool. Verification with dpkg-sig is not possible because the two tools are not compatible. This process covers 5 steps: Step 1: install debsig Enter th more
The CodeMeter settings in the Windows registry are retained by default when uninstalling the CodeMeter Runtime under Windows. The reason for this is that often only a newer CodeMeter software version more
When using the CodeMeter Merge Modules in a WiX setup, it is necessary and recommended to suppress the following ICE errors when compiling: ICE03;ICE80;ICE82;ICE30 You can specify them in your Visual more
To Install the CodeMeter Runtime without the .NET Framework components, please proceed as follows: 1. Open commandline (DOS-Box) as administrator. Type "cmd" in Windows search and right-click on the e more
In case of difficulties during CodeMeter installation or uninstallation, the installer logs are required for further investigation. These logs are located in the temp directory of the user who perform more
Preparing the Secure Disk feature for a CmStick with memory involves two steps: 1. configuring the enabling blocks to enable the Secure Disk for this CmStick. 2. create a Secure Disk partition using t more
The SecureDisk partition of a CmStick with additional flash memory can only be accessed via the CodeMeter Core API. It is not displayed in Windows Explorer. Below you will find code snippets for vario more
To configure a CmStick/M the tool CmConfigDiskGUI is required. You can download it under the following link: https://wibu.sharefile.com/d-s964196b38e54cf8a Supported are CmSticks with the following it more
Starting with Version 5.0, CodeMeter supports devices that conform to the USB Human Interface Device (HID) class specification. As an alternative option to the Mass Storage Device status, CmDongles ca more
CmDongles without real flash memory, i.e. devices with a memory of less than 128 MB, can be configured to be detected as a local disk or removable disk. Depending on how your system is configured and more
Please register your CmDongle at my.codemeter.com and request the Master Password for your CmDongle by specifying the serial number with an email to support(at)wibu.com. You will receive the CmDongle more
Creating a CD-ROM partition and writing a *.iso file for a CmStick with flash memory involves the following 5 steps: Step 1. configure enabling blocks to control the CD-ROM partition. Step 2. create t more
This is only useful for CmDongles with flash memory. To assign a permanent drive letter, please proceed as follows: 1. Open CodeMeter Control Center. 2. Click the "Process Stop CodeMeter Service" menu more
The VendorID (VID) is an identifier assigned by the USB Implementers Forum for companies that manufacture USB devices. The assigned VID is only assigned once and cannot be changed. All CmDongle produc more
When a Smart Bind CmActLicense has been applied with CodeMeter version 6.90 or later, a new mechanism is used to detect significant changes on virtual machines (restoring a snapshot or cloning the VM) more
Questa schermata riduce il consumo di energia del monitor quando non sei attivo sul nostro sito. Per riprendere la navigazione è sufficiente muovere il mouse.